
|
[si-list]
||
[Date Prev]
[09-2004 Date Index]
[Date Next]
||
[Thread Prev]
[09-2004 Thread Index]
[Thread Next]
[SI-LIST] Re: Bulk caps
- From: "Jim Antonellis" <janton@xxxxxxxxxxxxxxxxxx>
- To: <ravindra@xxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Thu, 2 Sep 2004 15:42:47 -0400
Ravindra,
As the second stage of a complete PDS ("Power Distribution System"),
with the VRM ("Voltage Regulator Module") given as the the first stage,
before, or at entry to bulks, I would like to point you to many fine=20
email threads on this topic that are archived from this list ( I have
reprinted the access info below that is the trailer of all si-list
email).
I also note that many of the signal integrity books cover this topic
and they too are presented in the archives.
Jim (not one of the gurus)
=20
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
-
Jim Antonellis jim.antonellis@xxxxxxxxxxxxx
Sandburst Corp www.sandburst.com
Office: 978.689.1669=20
Cell: 978.618.4745
This message and any attachments are Confidential and may be Legally
Privileged. It is intended solely for the addressee. If you are not=20
the intended recipient, please delete this message from your system=20
and notify us immediately. Any dis-closure, copying, distribution or=20
action taken or omitted to be taken by an unintended recipient in=20
reliance on this message is prohibited and may be unlawful.
=20
=20
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Ravindra
Sent: Thursday, September 02, 2004 5:48 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Bulk caps
Hi Gurus!
How do i decide as to how many bulk caps should be used at the stage of
schematic entry and also what values??
I would like to know as to on what basis the placement of these bulk
capacitors is done
on board.Are there any related documents on this?
Regards,
Ravindra
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|