|
[si-list]
||
[Date Prev]
[09-2004 Date Index]
[Date Next]
||
[Thread Prev]
[09-2004 Thread Index]
[Thread Next]
[SI-LIST] Re: 90 degree bend
- From: Vinu Arumugham <vinu@xxxxxxxxx>
- To: gstokes@xxxxxxxxx
- Date: Thu, 02 Sep 2004 08:57:45 -0700
LC (free download) from http://lc.cray.com too can characterize such
structures.
Thanks,
Vinu
Geoff Stokes wrote:
>Hi All
>
>No-one has mentioned the tools which can characterise 90 degree bends and
>other RF discontinuities on screen. These include, in roughly increasing
>order of cost:
>Eagleware Genesys
>AWR Microwave Office
>Agilent EEsof
>Cadence SpectreRF
>
>The effects are small but noticeable at about 1 GHz, increasing at higher
>frequencies. Some of these tools will be too expensive for some operations,
>but Eagleware do a personal version which does the job for around 1k
>dollars. The models are semi-empirical circuit equivalents which are very
>good up to 3 or 4 Ghz and are useful up to 10 GHz or possibly more. For
>best accuracy at high frequencies a 3D wave simulator is required, such as
>Ansoft HFSS or CST Microwave Studio.
>
>Cheers
>Geoff
>
>
>
>>-----Original Message-----
>>From: Grasso, Charles [mailto:Charles.Grasso@xxxxxxxxxxxx]
>>Sent: 30 August 2004 22:34
>>To: 'cpad@xxxxxxxxx'; 'si-list@xxxxxxxxxxxxx'
>>Subject: [SI-LIST] Re: 90 degree bend
>>
>>
>>Chris,
>>
>>When signals have a rise time of 100pS or better
>>that translates to a bw of 3.5GHz (well into the
>>uwave region) - So aren't bends important in this case?
>>
>>Best Regards
>>Charles Grasso
>>Senior Compliance Engineer
>>Echostar Communications Corp.
>>Tel: 303-706-5467
>>Fax: 303-799-6222
>>Cell: 303-204-2974
>>Email: charles.grasso@xxxxxxxxxxxx;
>>Email Alternate: chasgrasso@xxxxxxxx
>>
>>
>>
>>-----Original Message-----
>>From: Chris Padilla [mailto:cpad@xxxxxxxxx]
>>Sent: Monday, August 30, 2004 10:23 AM
>>To: si-list@xxxxxxxxxxxxx
>>Subject: [SI-LIST] Re: 90 degree bend
>>
>>
>>I have yet to see any issue arising from bends described as
>>below. Simulation doesn't show much and neither does real
>>life. In the
>>microwave world, yes, they will need consideration.
>>
>>Chris Padilla
>>EMC Engineer
>>Cisco Systems
>>San Jose, CA
>>
>>At 09:20 PM 8/30/2004 +0530, Kanakaraj wrote:
>>
>>
>>>Hi,
>>>The simplest thing is that when you make 90 degree turns on the pcb
>>>track, the electron moving in it cannot make sudden turns..(
>>>
>>>
>>remember
>>
>>
>>>inertia of direction in physics and a bus making a 90 degree turn at
>>>full speed)... so some of the electrons will jump out of the
>>>
>>>
>>pcb track
>>
>>
>>>and will cause emi issues..
>>>
>>>and Andy, Andrew, Ray anderson and the seniors will give you more
>>>inputs on that. Well I am too like you. a beginner :-)
>>>Kanak
>>>
>>>----- Original Message -----
>>>From: "New Bee" <pcb_user@xxxxxxxxxxx>
>>>To: <si-list@xxxxxxxxxxxxx>
>>>Sent: Monday, August 30, 2004 5:19 PM
>>>Subject: [SI-LIST] 90 degree bend
>>>
>>>
>>>
>>>
>>>>Hi
>>>>
>>>>I am a new PCB designer.
>>>>
>>>>I have a silly doubt - really do not know if I ask it in
>>>>
>>>>
>>this forum.
>>
>>
>>>>why is it suggested not to have 90 degree bends for the
>>>>
>>>>
>>traces while
>>
>>
>>>routing ?
>>>
>>>
>>>>If some one can give me the electrical/electronics and
>>>>
>>>>
>>manufacturing
>>
>>
>>>reasons I will be greatful to them
>>>
>>>
>>>>If this is not the right forum to address this please let me know
>>>>where
>>>>
>>>>
>>>can I ask
>>>
>>>
>>>>Thanks in advance
>>>>Kam
>>>>
>>>>Yahoo! India Matrimony: Find your life partner online.
>>>>
>>>>
>>>>Yahoo! India Matrimony: Find your life partneronline.
>>>>
>>>>------------------------------------------------------------------
>>>>To unsubscribe from si-list:
>>>>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject
>>>>field
>>>>
>>>>or to administer your membership from a web page, go to:
>>>>http://www.freelists.org/webpage/si-list
>>>>
>>>>For help:
>>>>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>>>
>>>>List FAQ wiki page is located at:
>>>> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>>>>
>>>>List technical documents are available at:
>>>> http://www.si-list.org
>>>>
>>>>List archives are viewable at:
>>>>http://www.freelists.org/archives/si-list
>>>>or at our remote archives:
>>>>http://groups.yahoo.com/group/si-list/messages
>>>>Old (prior to June 6, 2001) list archives are viewable at:
>>>> http://www.qsl.net/wb6tpu
>>>>
>>>>
>>>>
>>>>
>>>>
>>>------------------------------------------------------------------
>>>To unsubscribe from si-list:
>>>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>>>
>>>or to administer your membership from a web page, go to:
>>>http://www.freelists.org/webpage/si-list
>>>
>>>For help:
>>>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>>
>>>List FAQ wiki page is located at:
>>> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>>>
>>>List technical documents are available at:
>>> http://www.si-list.org
>>>
>>>List archives are viewable at:
>>> http://www.freelists.org/archives/si-list
>>>or at our remote archives:
>>> http://groups.yahoo.com/group/si-list/messages
>>>Old (prior to June 6, 2001) list archives are viewable at:
>>> http://www.qsl.net/wb6tpu
>>>
>>>
>>>
>>------------------------------------------------------------------
>>To unsubscribe from si-list:
>>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>>
>>or to administer your membership from a web page, go to:
>>http://www.freelists.org/webpage/si-list
>>
>>For help:
>>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>
>>List FAQ wiki page is located at:
>> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>>
>>List technical documents are available at:
>> http://www.si-list.org
>>
>>List archives are viewable at:
>> http://www.freelists.org/archives/si-list
>>or at our remote archives:
>> http://groups.yahoo.com/group/si-list/messages
>>Old (prior to June 6, 2001) list archives are viewable at:
>> http://www.qsl.net/wb6tpu
>>
>>------------------------------------------------------------------
>>To unsubscribe from si-list:
>>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>>
>>or to administer your membership from a web page, go to:
>>http://www.freelists.org/webpage/si-list
>>
>>For help:
>>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>>
>>List FAQ wiki page is located at:
>> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>>
>>List technical documents are available at:
>> http://www.si-list.org
>>
>>List archives are viewable at:
>> http://www.freelists.org/archives/si-list
>>or at our remote archives:
>> http://groups.yahoo.com/group/si-list/messages
>>Old (prior to June 6, 2001) list archives are viewable at:
>> http://www.qsl.net/wb6tpu
>>
>>
>>
>>
>
>
>_________________________________________________________
>
>Zetex Semiconductors - Solutions for an analog world
>
>http://www.zetex.com
>_________________________________________________________
>
>######################################################################
>E-MAILS are susceptible to interference. You should not assume that
>the contents originated from the sender or the Zetex Group or that they
>have been accurately reproduced from their original form.
>Zetex accepts no responsibility for information, errors or omissions in
>this e-mail nor for its use or misuse nor for any act committed or
>omitted in connection with this communication.
>If in doubt, please verify the authenticity with the sender.
>######################################################################
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> http://www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
