FreeLists / si-list / [SI-LIST] Re: Loading CADSTAR layout in Specctraquest!

[Ray Anderson <reanderson@xxxxxxxxxxxxx>]

G.Srinivasan wrote:

>I have some layouts made in CADSTAR & ORCAD. Can I load them in 
>Specctraquest? The openbook lists some s/w names only for importing third 
>party logic but I didn't find anything for importing a board. 
>
>  
>
Since Cadence owns both the Orcad and Specctraquest products I would 
suspect there is a path for connectivity. Don't know about Cadstar. I 
think your local AE (Apps Engineer) from Cadence would be your primary 
source of info on this question.

-Ray

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu