|
[si-list]
||
[Date Prev]
[09-2004 Date Index]
[Date Next]
||
[Thread Prev]
[09-2004 Thread Index]
[Thread Next]
[SI-LIST] Loading CADSTAR layout in Specctraquest!
- From: "G.Srinivasan" <srini@xxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Wed, 1 Sep 2004 06:54:37 -0000
I have some layouts made in CADSTAR & ORCAD. Can I load them in
Specctraquest? The openbook lists some s/w names only for importing third
party logic but I didn't find anything for importing a board.
--
G.Srinivasan
Scientist/Engineer
Payload Checkout Electronics Division
Sensor Electronics Group
SAC/ISRO, Ahmedabad-380015.
Phone:
Off:079-26914217,26914250
Res:079-31104274
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
