
|
[si-list]
||
[Date Prev]
[09-2003 Date Index]
[Date Next]
||
[Thread Prev]
[09-2003 Thread Index]
[Thread Next]
[SI-LIST] Re: Reference Plane
- From: "Lee Ritchey" <leeritchey@xxxxxxxxxxxxx>
- To: "Zhangkun" <zhang_kun@xxxxxxxxxx>,"si-list" <si-list@xxxxxxxxxxxxx>
- Date: Mon, 8 Sep 2003 08:08:25 -0700
Zhangkun,
If you have designed your power subsystem correctly, the Vcc and ground
planes of you power supply will be tied to each other through less than 10
milliohms at all of the frequencies that are in you signal, so you don't
haveto worry about a disconnect.
Lee
> [Original Message]
> From: Zhangkun <zhang_kun@xxxxxxxxxx>
> To: si-list <si-list@xxxxxxxxxxxxx>
> Date: 9/8/2003 9:50:26 PM
> Subject: [SI-LIST] Reference Plane
>
> Dear All:
> There are one driver and one receiver, which is connected by one trace.
The driver and receiver use GND as their reference. The trace use VCC as
its reference plane. As shown in power integrity, there is impedance
between power and ground. Therefore, there are one disconnection at the
driver and one disconnection at the receiver. Would these two disconnection
disgrade signal integrity?
>
> Best Regards
>
> Zhangkun
> 2003.09.08
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|