FreeLists / si-list / [SI-LIST] Reference Plane

[si-list] || [Date Prev] [09-2003 Date Index] [Date Next] || [Thread Prev] [09-2003 Thread Index] [Thread Next]

[SI-LIST] Reference Plane

From: Zhangkun <zhang_kun@xxxxxxxxxx>
To: si-list <si-list@xxxxxxxxxxxxx>
Date: Mon, 08 Sep 2003 20:57:09 +0800

Dear All:
There are one driver and one receiver, which is connected by one trace. The 
driver and receiver use GND as their reference. The trace use VCC as its 
reference plane. As shown in power integrity, there is impedance between power 
and ground. Therefore, there are one disconnection at the driver and one 
disconnection at the receiver. Would these two disconnection disgrade signal 
integrity?

Best Regards

Zhangkun
2003.09.08


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu