FreeLists / si-list / [SI-LIST] Choose the correct ground symbol

[obarkan@xxxxxxxxxxx]

Dear Student,

You will get your error message if you use the wrong ground symbol. (GND
floating, etc.) I am also a student and I was baffled by this as well. You have
to make sure that you have a ground symbol called "0/Source". If you put a
ground symbol like GND/Earth, etc. you will get that error message.

p.s. If you don't see the ground symbol 0/Source when you click on the GND icon
on the right side, then make sure that  you add libraries to your GND menu until
this symbol is available.

Ozdal





------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu