|
[si-list]
||
[Date Prev]
[09-2001 Date Index]
[Date Next]
||
[Thread Prev]
[09-2001 Thread Index]
[Thread Next]
[SI-LIST] Re: PCI at 66 Mhz
- From: MikonCons@xxxxxxx
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 3 Sep 2001 16:54:22 EDT
A 5-slot CPCI system operating at 66 MHz is straight forward if you do your
design carefully. I have successfully executed same on two occasions over a
year ago for military aircraft upgrades (F-18 and F-22). Obey all the SI
rules, use 10 Ohm series terminations (as per the PCI specification, and no
termination diodes are necessary), and you will find proper settling within 5
ns for all drive strengths, and compatibility with 33 MHz cards as well.
There was also a paper that demonstrated the same success presented at
DesignCon99, but I don't recall the author.
Respectfully,
Mike
Michael L. Conn
Owner/Principal Consultant
Mikon Consulting
(408)727-5697
*** Serving Your Needs with technical Excellence ***
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
