FreeLists / si-list / [SI-LIST] Re: UltraCAD ESR and Bypass Capacitor Calculator

["Peterson, James F (FL51)" <james.f.peterson@xxxxxxxxxxxxx>]

You can't forget PSPICE. No offense, but I've looked at your tool,
and PSPICE does a better job!

-----Original Message-----
From: Doug Brooks [mailto:doug@xxxxxxxxxx]
Sent: Monday, August 04, 2003 6:33 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: UltraCAD ESR and Bypass Capacitor Calculator


Perhaps I should have clarified my comment as follows!


1. The reason we wrote the calculator in the first place was because we
>couldn't figure out how to make the frequency response calculation for an
>arbitrary number of capacitors with arbitrary values, inductance and ESR
>any other way******** with the resources we had availale to us*********. 
>Then we figured others might have the same problem and would
>like access to the same tool.


>(I did not mean to imply there weren't any other tools that could do this. 
>And I apologize if that's the way it came across. Some of the other tools 
>readily available, such as Excel and Mathcad, will do the job, but with so 
>much overhead that for a large problem it takes forever to complete.)
>

Doug Brooks' new book, "Signal Integrity Issues and Printed Circuit Board 
Design" has just been released by Prentice Hall. See details and ordering 
info at www.ultracad.com
____________________________________________________________________________
__


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu