FreeLists / si-list / [SI-LIST] [Negative Circuit elements?]

[You Se Ho <yous@xxxxxxxxxxxxxxxxxx>]

 To Dear all:

 Is it Ok to use negative RLCG values in Spice simulation for time
domain and frequency domain simulation if I happen to have those negative
circuit element values? Passivity is one possible reason that people say
no that I can think of. I cannot find definite answer not using negative
values. Anyway Pspice allows me to use those values, I think there is a
reason for it.

 Thanks
 sincerely,
 se-ho You




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu