FreeLists / si-list / [SI-LIST] Re: Layout service recommendations

[Doug Brooks <doug@xxxxxxxxxx>]

If I might, I'd like to make two observations about this thread.

1. It seems to me that when one member of this list asks for 
recommendations about vendors, it is not unreasonable for another 
contributing member of the list to simply raise their hand and say "Hey, 
don't forget about us!" I don't consider a response to a question the same 
as blatant unsolicited advertising. If the rest of this list feels 
differently, then I analogize to you all.

2. Several people have taken positions that, frankly, we don't agree with. 
It seems to me we should have the opportunity to respond without being 
chastised for "advertising." Case in point:  Several people have suggested 
that outside PCB design vendors must be physically close, and close contact 
is required. At some fear of criticism, I will point out that several of 
our high-speed customers are on the East coast, some distance away from our 
Bellevue, WA.  location, and there have been no problems at all with 
distance!  (At further risk, I might add that when good people work with 
good people, distance is not an issue at all.)


Sorry if this type of communication offends any of our gurus.

Doug Brooks




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu