|
[si-list]
||
[Date Prev]
[08-2001 Date Index]
[Date Next]
||
[Thread Prev]
[08-2001 Thread Index]
[Thread Next]
[SI-LIST] PCI debugging
- From: "Patel, Bhavesh" <BPatel@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 9 Aug 2001 10:14:24 -0700
Hi! I had a question regarding PCI bus that is running at 33MHz and the
question pertains to the debugging aspect. On the PCI bus I can pass packet
size of 1K for 10K iterations but greater than 10K I start to see mismatches
in the data sent out and the data received.
My question is how do I correlate this with simulation i.e. is there a way I
can simulate this with a simulator.
I know it is best to use a PCI analyzer but we are little bit away from
getting that up.
Any suggestions are welcome.
Thanks in advance
Bhavesh
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
