FreeLists / si-list / [SI-LIST] Modeling Cable

[Srivats Partha <vats123@xxxxxxxxx>]

Hello Gurus
I have a pasternac RG 400/U cable. We are using  this to hook a 3 ghz scope to 
a CDM  ESD tester. I want to model this cable in Cadence environment . I have 
used the LMG tool in cadence previously , it does not seem to have a option to 
model co axial cable, the tool has options to model only a strip line, micro 
stripline , CPW and a sub loss  line. Under what category should I put this RG 
400/U cable , Is it a coaxial cable? If so any hints on generating a RLCG 
matrix for this cable so that I could plug into the MTLINE model in spectre 
environment and use it for simulations? else any suggestions on how I should go 
about modeling this structure?
Regards
Srivats
 
--
I have no special talents. I am only passionately curious. AE




       
____________________________________________________________________________________
Yahoo! oneSearch: Finally, mobile search 
that gives answers, not web links. 
http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu