FreeLists / si-list / [SI-LIST] Re: Resistors to use for DDR termination

["Mikhail Matusov" <matusov@xxxxxxxxxxxx>]

> All I am wondering about is what other people who have _designed_
> actual borads do use as resitors - a handfull of 0603, 0402, what? Where
do I get them?
> Any suitable arrays? I did try searching without much luck, otherwise I
would not have
> asked this...

If you don't mind BGAs try these:
http://www.ctsclearone.com/components/clearone.asp


=======================
Mikhail Matusov
Hardware Design Engineer
Square Peg Communications
Tel.: +1 (613) 271-0044 ext.231
Fax: +1 (613) 271-3007
http://www.squarepeg.ca



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu