FreeLists / si-list / [SI-LIST] Resistors to use for DDR termination

["Dimiter Popoff" <dp@xxxxxxxxxxx>]

I am routing a board with an MPC5200 (freescale/mot) which has a
DDR interface (133 MHz clock). What sort of termination resistors (resistor 
arrays?)
do I put? Thera are just so many of them, I begin wondering how
forgiving the 133 MHz interface is and could I get away by just routing
without any terminating restors at <2 inches trace length... I did that
with SDRAM and it worked, now actually I won't be that daring, I cannot
afford a failed board design, it's just the vast number of resistors which
brings these thoughts.
 Thanks in advance for the shared experience,

Dimiter

------------------------------------------------------
Dimiter Popoff               Transgalactic Instruments

http://www.tgi-sci.com
------------------------------------------------------

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu