
|
[si-list]
||
[Date Prev]
[07-2004 Date Index]
[Date Next]
||
[Thread Prev]
[07-2004 Thread Index]
[Thread Next]
[SI-LIST] spliting lvds clk
- From: "Moshe Frid" <moshef@xxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Wed, 7 Jul 2004 10:42:57 +0200
hi all
I need to split diff clk of lvds at 800 MHz to 2 fpga that are far one
from the other
the data are in 8 channels ,4 to each fpga .
should I split them with buffers ? what about the delay of the clk
(the data would not be buffered)
tnks.
Moshe Frid
Adcom pcb design
Email:moshef@xxxxxxxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|