
|
[si-list]
||
[Date Prev]
[07-2003 Date Index]
[Date Next]
||
[Thread Prev]
[07-2003 Thread Index]
[Thread Next]
[SI-LIST] FW: Field Solver Questions
- From: "Sainath Nimmagadda" <gigabit@xxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>, <emc-pstc@xxxxxxxx>
- Date: Fri, 11 Jul 2003 12:30:15 -0800
Field solver experts:
I received very few responses on-line and private. I guess this is due
to lightning effect that upset some servers out there recently. Some
experts may've been on summer vacation ...
Here is another question from a different angle.
Is/was there any effort to map any field solver algorithm to
application-specific silicon? If so, what's the experience? If none,
what are the pros and cons of such implementation?
Thanks in advance,
Sainath
---------Included Message----------
>Date: Wed, 9 Jul 2003 11:50:05 -0800
>From: "Sainath Nimmagadda" <gigabit@xxxxxxxxxx>
>Reply-To: "Sainath Nimmagadda" <gigabit@xxxxxxxxxx>
>To: <si-list@xxxxxxxxxxxxx>, <emc-pstc@xxxxxxxx>
>Cc: <gigabit@xxxxxxxxxx>
>Subject: Field Solver Questions
>
>Field solver experts:
>
>I have some generic questions. Consider the well-known finite element
>method(FEM) solver and assume full-wave solution and almost perfect
>boundary, unless mentioned otherwise.
>
>1) Are there any benchmarks on the speed of these solvers compared to
>other kinds of solvers in time-domain or frequency-domain?
>
>2) If a raw, non-optimized solver does it in T time, what is the likely
>max. speed improvement using conceptual or computational optimization?
>An educated guess will help for a start.
>
>3) Suppose a solver is designed to solve for only three E(or
>H)components, instead of all six field components. What is the likely
>max. speed improvement? Again, an educated guess will help for a
start.
>
>4) Would you consider the solver in 3) a full-wave solver? If yes,
under
>what conditions? If no, please give reasons.
>
>5) If you were to design the solver in 3), what kind of conceptual
>pitfalls, if any, would you look for and try to avoid?
>
>Thanks in advance,
>Sainath
>_____________________________________________________________
>
>
>
---------End of Included Message----------
_____________________________________________________________
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|