
|
[si-list]
||
[Date Prev]
[07-2001 Date Index]
[Date Next]
||
[Thread Prev]
[07-2001 Thread Index]
[Thread Next]
[SI-LIST] Re: decoupling
- From: Khalid Ansari <khalida@xxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 12 Jul 2001 11:38:56 -0700
>
> The maximum dynamic current swing is from 15 to 20 amps
Ray, how do you obtain the 15 to 20 amps number, I am a little confused
on how to go about obtain the transient current value.
>
> then: (1.8 * .02) 36 mV
> Zt = ---------- = --------- = 7.2 mOhms
> (20 - 15) 5 amps
>
>
> The equation (at least the one published in our paper
>in 1999) assumed a constant target Z from DC to daylight. Our
>view on that has changed since the original publication, but that
>is a different conversation....
>
>
>-Ray
>
>
> >
> >Ken,
> >
> >I've played around with your equation below, but I'm having trouble getting
> >anything meaningful out of it. Did this come from a book somewhere that
> has an
> >explanation, or is this your own? If it's the latter, do you have a
> >derivation?
> >
> >A couple of specific questions:
> >
> >is 'powersupply' your VCC voltage?
> >where did 0.02 come from? Is this 5% variation divided by 2?
> >
> >Thanks a lot,
> >mark
> >
> >
>
> >Ken Cantrell wrote:
> >
> >> I use Ztarget = (powersupply*0.02)/di/dt, and have stopped using COGs (ESL
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at:
> http://www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|