FreeLists / si-list / [SI-LIST] USB cable model

[mukul pingley <mukulpingley@xxxxxxxxx>]

Hi All,
      I have below query, it would be greatly
appreciated if you can provide me with some info. on
this.  
        Is it possible to generate a model for USB? Is
there any the equivalent electrical model of USB cable
model for USB2.0 transceiver? If not,
is it possible to generate a model for USB cable for
stimulating standing wave phenonmena such as
reflected-wave effect, bounce back effect, propogation
delay, eye diagram and jitter in any spice simulator?

Thanks,
Mukul



      
____________________________________________________________________________________
Park yourself in front of a world of choices in alternative vehicles. Visit the 
Yahoo! Auto Green Center.
http://autos.yahoo.com/green_center/ 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu