FreeLists / si-list / [SI-LIST] SPLIT POWER PLANE

["sreekanth namboothiri" <nsreekanth@xxxxxxxxxxxx>]

Hello Gurus,
I  have a power splitt in my design which is unavoidable,and due to some
routing constraints some signals are crossing over the split in  another
layer.

Is there any solution for such sistuations?

I rembr , earlier i had almost same issues with GND splits and we managed
it with tying up both the GNDs with 0 ohm resistors.

What can be done ,in the case of power split?

Sreekanth

-- 
___________________________________________________
Play 100s of games for FREE! http://games.mail.com/


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu