FreeLists / si-list / [SI-LIST] SSN can affect input behaviour?

[si-list] || [Date Prev] [06-2006 Date Index] [Date Next] || [Thread Prev] [06-2006 Thread Index] [Thread Next]

[SI-LIST] SSN can affect input behaviour?

From: "Giovanni Guasti" <giovanni.guasti@xxxxxxxxxx>
To: <si-list@xxxxxxxxxxxxx>
Date: Thu, 1 Jun 2006 15:02:16 +0100

Hi all,
Could the SSN in a component cause a receiver - in the same component -
to fail?

A signal always static high sometimes is read as low. SSN could be
important in this component, but I do not figure the model of what is
happening: could it be due to the reference GND of that receiver that
grows during a H->L simultaneous transition?

Best regards,

            Giovanni


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu