Date Index for si-list, 06-2005

[si-list] || [06-2005 Date Index] [06-2005 Thread Index]

[SI-LIST] Re: Scale option in Hspice - Andrew Ingraham
[SI-LIST] FW: Re: Scale option in Hspice - Beal, Weston
[SI-LIST] Signal Integrity with Protel 2004 - Bob McCreight
[SI-LIST] Jitter on serial data buses - Damon Bowser
[SI-LIST] Re: Jitter on serial data buses - Mike Li
[SI-LIST] Re: Signal Integrity with Protel 2004 - Dan Bostan
[SI-LIST] SI Engineer position in Altera - Binshen Meng
[SI-LIST] Re: FW: Re: Scale option in Hspice - Kai Keskinen
[SI-LIST] Re: S11 or S21 - Grossman, Brett
[SI-LIST] Re: S11 or S21 - steve weir
[SI-LIST] Re: VHDL-AMS models in automotive industry - Lynne D. Green
[SI-LIST] Getting a Clean eye in HSPICE - Jayaprakash
[SI-LIST] Re: Getting a Clean eye in HSPICE - Ray Anderson
[SI-LIST] Noise measurement - Pfeifer, Alan
[SI-LIST] 74LVC125A with pull up resistors in the input - Kbalasubramanian
[SI-LIST] Re: Noise measurement - Larry SMITH
[SI-LIST] HW openings at Silverback Systems - Jayarama Shenoy
[SI-LIST] Can we run DDR2 devices below 125 Mhz clock frequency - Unni Gangadharan
[SI-LIST] Job Opening. - San Wong
[SI-LIST] near and far end crosstalk data derived from IEC test - Doug Smith
[SI-LIST] New version of Vector Fitting available - Gustavsen Bjørn
[SI-LIST] Xilinx LVDS and SCSI - Riccardi Stefano Compass
[SI-LIST] Re: Can we run DDR2 devices below 125 Mhz clock frequency - kfrobinson
[SI-LIST] differential DJ and RJ - John Lipsius
[SI-LIST] Re: differential DJ and RJ - John Lipsius
[SI-LIST] Re: Jitter on serial data buses - Ron Miller
[SI-LIST] Re: Using Matlab for SERDES simulations - Ron Miller
[SI-LIST] Re: Using Matlab for SERDES simulations - Chris Cheng
[SI-LIST] w element table model - methodology - John Lipsius
[SI-LIST] Re: Jitter on serial data buses - steve weir
[SI-LIST] Re: Jitter on serial data buses - Mike Li
[SI-LIST] Re: Jitter on serial data buses - Chris Cheng
[SI-LIST] Length of the 1.8V LVCMOS - signals at 212MHZ DDR - Hema S - CTD, Chennai.
[SI-LIST] DFE - Guasti Giovanni
[SI-LIST] Re: DFE - Ray Anderson
[SI-LIST] Re: DFE - Mikhail Matusov
[SI-LIST] DDR2 at speeds faster than DDR2-533 - Bob McNamara
[SI-LIST] Re: DDR2 at speeds faster than DDR2-533 - Tom Dagostino
[SI-LIST] via impedance SE and DIFF - Dennis Rehm
[SI-LIST] Far-end crosstalk over long PCB trace - Sogo Hsu
[SI-LIST] Re: Far-end crosstalk over long PCB trace - Istvan Novak
[SI-LIST] Re: Far-end crosstalk over long PCB trace - Sogo Hsu
[SI-LIST] Re: Far-end crosstalk over long PCB trace - Zhangkun
[SI-LIST] Re: Far-end crosstalk over long PCB trace - Sogo Hsu
[SI-LIST] Re: Far-end crosstalk over long PCB trace - Sogo Hsu
[SI-LIST] Re: Far-end crosstalk over long PCB trace - Istvan Novak
[SI-LIST] Re: DDR2 at speeds faster than DDR2-533 - Douglas Burns
[SI-LIST] FW: Re: Using Matlab for SERDES simulations - Fasig, Jonathan L.
[SI-LIST] BGA Crosstalk Tech-Online TODAY! - Mark Alexander
[SI-LIST] Re: DFE - Ray Anderson
[SI-LIST] Signal Integrity position available - ServerEngines - Santa Clara, CA - Jay Avula
[SI-LIST] SUBSCRIBE - Samit_Ashdhir
[SI-LIST] Question on SPI/SFI-5 - Buchs, Kevin J.
[SI-LIST] unsubscribe' - Mark Villegas
[SI-LIST] Pkg Power Plane Analysis - Jim Antonellis
[SI-LIST] Re: Scale option in Hspice - Tracy Barclay
[SI-LIST] Measuring eyediagram worsecase width and height - vijay kumar
[SI-LIST] Re: Measuring eyediagram worsecase width and height - Craig Clewell
[SI-LIST] Variations in TDR from Via Tuning - Jim Antonellis
[SI-LIST] Re: Variations in TDR from Via Tuning - Ray Anderson
[SI-LIST] Re: Variations in TDR from Via Tuning - Peterson, James F (FL51)
[SI-LIST] Re: Scale option in Hspice - Kai Keskinen
[SI-LIST] Re: Variations in TDR from Via Tuning - Bill *
[SI-LIST] Need for parallell termination to Vtt on DDR SDRAM? - Svein Medhus
[SI-LIST] Re: Need for parallell termination to Vtt on DDR SDRAM? - Dan Bostan
[SI-LIST] Reference Plane under PCI edge finger pads - Nitin Sood
[SI-LIST] Re: DDR2 at speeds faster than DDR2-533 - Bob McNamara
[SI-LIST] Re: Variations in TDR from Via Tuning - Jim Antonellis
[SI-LIST] Stable Pulse width generation - Adeel Malik
[SI-LIST] Re: Stable Pulse width generation - Istvan Novak
[SI-LIST] Re: Stable Pulse width generation - dp
[SI-LIST] Ferrite loaded transmission lines - R.Sobrany
[SI-LIST] How to evaluate the quality of xDSL signal channel accurately? - Stephen Wang
[SI-LIST] Surge current - caydin
[SI-LIST] Effective inductance calculation of a 3-wire system - Amitava Bhaduri
[SI-LIST] Re: Eye diagram measurement - Pratt, Gary
[SI-LIST] Re: Effective inductance calculation of a 3-wire system - Heyfitch
[SI-LIST] To remove reference planes under the gold finger areas - Cortex Chen
[SI-LIST] Re: To remove reference planes under the gold finger areas - Sogo Hsu
[SI-LIST] Re: To remove reference planes under the gold finger areas - Kai Keskinen
[SI-LIST] Re: To remove reference planes under the gold finger areas - Hassan O. Ali
[SI-LIST] Re: To remove reference planes under the gold finger areas - Loyer, Jeff
[SI-LIST] Re: To remove reference planes under the gold finger areas - Scott McMorrow
[SI-LIST] PCI Express Add-in Card - sunil.mekad
[SI-LIST] Re: Effective inductance calculation of a 3-wire system - Albert Ruehli
[SI-LIST] Effective inductance calculation of a 3-wire system - Al Ruehli
[SI-LIST] Re: PCI Express Add-in Card - Naren
[SI-LIST] Search for the paper about minimum BGA pad size in PCB - Pang Ning
[SI-LIST] Re: Search for the paper about minimum BGA pad size in PCB - steve weir
[SI-LIST] Re: Search for the paper about minimum BGA pad size in PCB - Sol Tatlow
[SI-LIST] Impedence for differential - ravin shah
[SI-LIST] Re: To remove reference planes under the gold finger areas - Loyer, Jeff
[SI-LIST] Re: Impedence for differential - steve weir
[SI-LIST] Propagation delay - santhosh.etavalath
[SI-LIST] Re: Search for the paper about minimum BGA pad size in PCB - Indrek Rebane
[SI-LIST] Re: Propagation delay - steve weir
[SI-LIST] Re: To remove reference planes under the gold finger areas - steve weir
[SI-LIST] Re: Search for the paper about minimum BGA pad size in PCB - Pang Ning
[SI-LIST] Re: To remove reference planes under the gold finger areas - Loyer, Jeff
[SI-LIST] Re: To remove reference planes under the gold finger areas - steve weir
[SI-LIST] Re: To remove reference planes under the gold finger areas - Loyer, Jeff
[SI-LIST] Re: To remove reference planes under the gold finger areas - steve weir
[SI-LIST] Siganl Integrity Engineer opening with Force10 Networks - Peter Tomaszewski
[SI-LIST] the "big V" approach - Peterson, James F (FL51)
[SI-LIST] Re: the "big V" approach - steve weir
[SI-LIST] Re: Propagation delay - Kai Keskinen
[SI-LIST] Impedance Webinar - Julian Ferry
[SI-LIST] basic question regarding inductor before Vcc - Roy M.
[SI-LIST] Re: basic question regarding inductor before Vcc - Thomas McGonigle
[SI-LIST] Re: basic question regarding inductor before Vcc - steve weir
[SI-LIST] Re: basic question regarding inductor before Vcc - Vijay S CHACHRA
[SI-LIST] Re: basic question regarding inductor before Vcc - venkat
[SI-LIST] Re: basic question regarding inductor before Vcc - steve weir
[SI-LIST] Re: basic question regarding inductor before Vcc - Pratap Narayan SINGH
[SI-LIST] digital to analogue noise coupling - Perry Qu
[SI-LIST] Re: digital to analogue noise coupling - steve weir
[SI-LIST] Re: digital to analogue noise coupling - Perry Qu
[SI-LIST] why do one need PRBS Rx AND Tx? - Roy Messinger
[SI-LIST] Re: digital to analogue noise coupling - steve weir
[SI-LIST] Re: why do one need PRBS Rx AND Tx? - steve weir
[SI-LIST] Re: digital to analogue noise coupling - Perry Qu
[SI-LIST] Re: why do one need PRBS Rx AND Tx? - Jim Antonellis
[SI-LIST] Re: digital to analogue noise coupling - art_porter
[SI-LIST] Re: why do one need PRBS Rx AND Tx? - Ghazzali Majeed
[SI-LIST] Re: why do one need PRBS Rx AND Tx? - Chris Cheng
[SI-LIST] Re: digital to analogue noise coupling - Perry Qu
[SI-LIST] Signal Integrity Engineering Position at Xilinx - Ray Anderson
[SI-LIST] Re: digital to analogue noise coupling - Istvan Novak
[SI-LIST] Re: digital to analogue noise coupling - Perry Qu
[SI-LIST] Jitter Netseminar. - Vipul Badoni
[SI-LIST] Crosstalk, part deux - art_porter
[SI-LIST] Crosstalk Paper - Michael Smith
[SI-LIST] Impedance Mismatch due to neck down - Qazi Arif Iqbal
[SI-LIST] Re: Impedance Mismatch due to neck down - Paul Levin
[SI-LIST] R: Impedance Mismatch due to neck down - Guasti Giovanni
[SI-LIST] Re: Impedance Mismatch due to neck down - Qazi Arif Iqbal
[SI-LIST] Re: Impedance Mismatch due to neck down - johndp
[SI-LIST] SI Package Analysis tools - Dagmara Avanindra
[SI-LIST] Thesis (Eliminating package resonances due to standing waves) - Vijay B
[SI-LIST] Re: SI Package Analysis tools - Heyfitch
[SI-LIST] Re: SI Package Analysis tools - Lynne D. Green
[SI-LIST] Re: SI Package Analysis tools - Peter Fekete
[SI-LIST] Re: Thesis (Eliminating package resonances due to stand ing waves) - Grasso, Charles
[SI-LIST] Re: Thesis (Eliminating package resonances due to standing waves) - Ray Anderson
[SI-LIST] Re: Thesis (Eliminating package resonances due to standing waves) - steve weir
[SI-LIST] Re: Thesis (Eliminating package resonances due to standing waves) - Virendra
[SI-LIST] Looking for simple script to parse and reformat IBIS .pkg file data - Ray Anderson
[SI-LIST] Re: Thesis (Eliminating package resonances due to standing waves) - Vijay B
[SI-LIST] Power problem - Zhangkun
[SI-LIST] Re: Power problem - Dr. Edward P. Sayre
[SI-LIST] Re: Power problem - steve weir
[SI-LIST] Fixing a black pad - Zilber Gil
[SI-LIST] Re: Fixing a black pad - Bill Wurst
[SI-LIST] Re: Fixing a black pad - Zilber Gil
[SI-LIST] Single crystal driving two different inputs of a chip - Rohan Hubli
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Ray Anderson
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Rohan Hubli
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Dimiter Popoff
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Joseph Wang
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Rohan Hubli
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Tom Dagostino
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Grasso, Charles
[SI-LIST] Re: Single crystal driving two different inputs of a chip - steve weir
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Zhangkun
[SI-LIST] Data Bus termination - mahesh.linge
[SI-LIST] Re: Data Bus termination - steve weir
[SI-LIST] Re: Data Bus termination - Darshan Mehta
[SI-LIST] Re: Fixing a black pad - Sol Tatlow
[SI-LIST] Tip and Ring routing consideration - Suganthi
[SI-LIST] Re: Tip and Ring routing consideration - hariharan
[SI-LIST] Re: Tip and Ring routing consideration - k EPD
[SI-LIST] Re: Single crystal driving two different inputs of a chip - Andrew Ingraham
[SI-LIST] Re: Fixing a black pad - Zilber Gil
[SI-LIST] Re: Fixing a black pad - Sol Tatlow
[SI-LIST] Re: Tip and Ring routing consideration - steve weir
[SI-LIST] Intel Job Opportunities - Wang, Long
[SI-LIST] *-AMS language versions in IBIS - Muranyi, Arpad
[SI-LIST] Re: Data Bus termination - ariazi
[SI-LIST] Re: Data Bus termination - Ravinder . Ajmani
[SI-LIST] FW: *-AMS language versions in IBIS - Muranyi, Arpad
[SI-LIST] SI position available at Broadcom - Matthew Kaufmann
[SI-LIST] Re: Data Bus termination - ariazi
[SI-LIST] Agilent TDR Normalization Questions - Chris Padilla (cpad)
[SI-LIST] Re: Agilent TDR Normalization Questions - Joseph Wang
[SI-LIST] Re: Agilent TDR Normalization Questions - Chris Padilla (cpad)
[SI-LIST] Re: Agilent TDR Normalization Questions - Joseph Wang
[SI-LIST] Re: Agilent TDR Normalization Questions - steve weir
[SI-LIST] HyperLynx Technical Marketing Engineer - Hargin, Bill
[SI-LIST] Substrate board impedance added to driver impedance for total output impedance of driver - Eric Steimle
[SI-LIST] Re: Substrate board impedance added to driver impedance for total output impedance of driver - Eric Steimle
[SI-LIST] Re: Substrate board impedance added to driver impedance for total output impedance of driver - Ray Anderson
[SI-LIST] Perl scripts for Hspice - Zanella, Fabrizio
[SI-LIST] Re: Perl scripts for Hspice - Ray Anderson
[SI-LIST] Re: Agilent TDR Normalization Questions - Jeremy Plunkett