FreeLists / si-list / [SI-LIST] Capturing the effects of impedance variation due to plane splits

[Mahesh Krishnan <maheshkrish@xxxxxxxxxxx>]

Hi all,
I was running some simulations with XTK on an Allegro database. The board has 
traces running across power plane splits which are as wide as 70 to 100 mils. 
But, I do NOT see the effects either in the waveforms on in the xfx related 
files (.tlp, .cpl).
 
I had set PARTIAL_PLANE_DEF = ISF in the .gcf file.
 
Is possible to extract the details of power plane splits from an Allegro data 
base? Or do I need to specify them in the .gcf? The shapes of the cuts were 
pretty complex to be modelled in the gcf.
 
Please let me know your thoughts.
Thanks,
--mahe.
                
---------------------------------
 ALL-NEW Yahoo! Messenger - sooooo many all-new ways to express yourself 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu