FreeLists / si-list / [SI-LIST] A question about ESD protection of high speed I/O IC

["Moore Mo (Mo Daochun)" <modaochun@xxxxxxxxxx>]

Hi all:
   I use a cable assembly(length=15m) between two racks,and the ESD of the 
driver IC is 500V(HBM),and the

equipment working inside the room, the data rate of the IC is up to 2.5Gbps.  
My question is: 

   Is it enough for this ESD level? 

   Which  ESD protection can be used in high speed I/O IC?


Best Regards
 
Moore Mo (Modaochun)
Huawei Technologies Co.,Ltd.
Tel:     86 755 28780808/89651436(L)/89651150(O)
FAX:     86 755 89650731  
Email:   modaochun@xxxxxxxxxx
website: http://www.huawei.com


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu