FreeLists / si-list / [SI-LIST] Re: hspice ploting (print) time limits

[bpanos <bill.panos@xxxxxxxxxxxxxxx>]

sorry, using hspice ver 2003.03..this last bit might be of importance !
-bp



bpanos wrote:

> drawing a blank here...
> performing a transient analysis, how do I set the output so I gather
> data to plot (print) from specific time interval? (say I wan the voltage
> output from 10ns to 50ns, where my actual transient input runs from 0 to
> 100ns). Do I use the .meas fnc?
> thanks
> Bill
>
> -- Binary/unsupported file stripped by Ecartis --
> -- Type: text/x-vcard
> -- File: bill.panos.vcf
> -- Desc: Card for bpanos
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
>                http://www.freelists.org/archives/si-list
> or at our remote archives:
>                http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>                http://www.qsl.net/wb6tpu
>


-- Binary/unsupported file stripped by Ecartis --
-- Type: text/x-vcard
-- File: bill.panos.vcf
-- Desc: Card for bpanos


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu