FreeLists / si-list / [SI-LIST] resend - Specctraquest model: mounted inductance

["Bart Bouma" <bart.bouma@xxxxxxxxx>]

Hi all,
I'm resending this post on Specctraquest mounted inductance. Until now no 
reactions received on this topic.
Is there no one on the si-list who can help a vendor to generate 
Specctraquest models?
I read so often that models are not available from vendors, now is your 
chance!
But I need some help. Please!

Bart
www.yageo.com
================  original post ========================================

Hi all,

I am starting to develop Specctraquest models for three-terminal 
capacitors, e.g. a feedthru capacitor.
Does anybody know how to extract, or how to determine, the mounted 
inductance of such a three-terminal capacitor?
Maybe someone already did this?

For a two terminal device the loop-inductance can be determined quite 
easily, but for a three terminal capacitor I could not find a single 
reference.
Of course it all depends on substrate thickness, vias and layout, but is 
there a general method how to calculate the mounted inductance or 
loop-inductance for such a device?
Any information is welcome!

regards, 
Bart Bouma
www.yageo.com

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu