FreeLists / si-list / [SI-LIST] Matching differential traces

["Edi Fraiman" <EdiFraiman@xxxxxxxxxxxxx>]

Hi All,
 

My question is related to matching differential traces on PCB.

 

What the theoretical explanation to the next rule of thumb:

 

Matching between + to - of signal should be 1/10 of edge rate.

 

 

 

Best regards,

Edi Fraiman

 

 

________________________________

NOTICE OF CONFIDENTIALITY:
This e-mail and any attachments may contain confidential and privileged
information. If you are not the intended recipient, please notify the
sender immediately by return e-mail and delete this e-mail and any
copies. Any dissemination or use of this information by a person other
than the intended recipient is unauthorized and may be illegal. 

________________________________

 

 

 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu