|
[si-list]
||
[Date Prev]
[05-2007 Date Index]
[Date Next]
||
[Thread Prev]
[05-2007 Thread Index]
[Thread Next]
[SI-LIST] Transfer impedance
- From: Sam M <si.rules@xxxxxxxx>
- To: si-list@xxxxxxxxxxxxx, si-list-bounce@xxxxxxxxxxxxx
- Date: Wed, 16 May 2007 19:15:03 -0400 (EDT)
Hello all,
I am confused abt the relation between transfer impedance (say Z12) and noise
coupling between two power rails. if the transfer impedance is less, does it
mean the noise coupling is less between the two power rails?
---------------------------------
Be smarter than spam. See how smart SpamGuard is at giving junk email the boot
with the All-new Yahoo! Mail
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
