FreeLists / si-list / [SI-LIST] Re: ESD, shoes, and hospitals...

[Ram Chundru <rchundru_umr@xxxxxxxxx>]

Patrick,
  I read the original article and it looks like the hospital equipment had soft 
failures (malfunction but no damage). If you want to non-destructively test the 
equipment you should test it for indirect ESD where you take an ESD generator 
and zap large metallic structures near the equipment but not into the 
equipment. Indirect ESD typically causes soft failures since the EM fields 
generated by the ESD generator couple to the equipment and induce voltages and 
currents that are typically not sufficient to cause damage. On the other hand, 
if you test the equipment for direct ESD where you directly zap the equipment 
you can cause both soft and hard failures. Soft failures are harder to analyze 
as the coupling path is not always obvious.
   
  Regarding your other question about measuring the static buildup on different 
footwear, you can use an electrostatic voltmeter (also called a non-contacting 
voltmeter) to measure the voltages on charged objects. The probe of the 
fieldmeter typically has to be positioned relatively close to the test object 
which may not be practical in your case. The voltages on the charged persons 
could go up to 30 kV which may not be measurable by the electrostatic voltmeter.
   
  Another thing you can do is to use an ESD event detector which has a magnetic 
loop antenna that picks up the fields generated by ESD and reads out the number 
of events. 
  Or you can build a simple small loop antenna and orient it such that it picks 
up the maximum magnetic field when the charged person discharges into a large 
grounded metal sheet. By doing repeated experiments with different footwear and 
measuring the induced voltages in the loop, you can compare different footwear. 
   
  Thanks,
  Ram Chundru
  ESD/EMC Engineer,
  Texas Instruments
   
  
Tom Dagostino <tom@xxxxxxxxxxxxx> wrote:
  Testing equipment will likely expose any issues with them and static. =
When
the issues are exposed there is a high probability that the instrument =
will
die. The response to static will be one of three, no effect, disrupts
operation, destroys unit. It is likely that the manufacture of the
equipment has already done the static discharge test as part of the
certification process. There are likely standard to which these pieces =
of
equipment must pass.

I think most semiconductor fabs have test equipment that everyone who =
enters
the fab must use to show the anti static protection measures the fab has
employed is working. You might want to check out what they use.

Tom Dagostino
Teraspeed(R) Labs
13610 SW Harness Lane
Beaverton, OR 97008
503-430-1065
tom@xxxxxxxxxxxxx=20
www.teraspeed.com=20

Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
401-284-1827

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] =
On
Behalf Of Zabinski, Patrick
Sent: Tuesday, May 08, 2007 3:21 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] ESD, shoes, and hospitals...


A recent article [1] states a Swedish hospital might ban
Crocs shoes (all-plastic clogs) to avoid static interference. They do =
not
cite any specific failures or severe problems with static charge, but
they're concerned enough to consider banning these particular shoes.

This article caught the attention of a few folks here, and
we thought about running some experiments to see how bad of
a problem we have in our hospital environments, but we're
not exactly sure of what experiments we should/could run
to determine if we have a problem, how bad of a problem we have, and =
what
shoe types are of most concern.

Got any ideas? =3D20

Are there some simple tests we can run that measure static buildup (in
Volts) on people wearing different footwear? Is there a simple way of
characterizing the relative performance of different footwear (e.g., =
ability
to build charge more than other shoes)?

We have thousands of pieces of medical equipment that might
be susceptible to static electricity. Any ideas how we
can non-destructively test the equipment?

Thanks,
Pat Zabinski




[1] We believe the original article was published in
The Local (http://www.thelocal.se/). A copy can be
found at http://www.wcsh6.com/printfullstory.aspx?storyid=3D3D58243.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
http://www.si-list.net

List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
http://www.si-list.net

List archives are viewable at: 
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu




       
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
 Check outnew cars at Yahoo! Autos.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu