
|
[si-list]
||
[Date Prev]
[05-2006 Date Index]
[Date Next]
||
[Thread Prev]
[05-2006 Thread Index]
[Thread Next]
[SI-LIST] Re: Microstrip Trace under Nickel
- From: steve weir <weirsi@xxxxxxxxxx>
- To: ryan.satrom@xxxxxxxxxxx,si-list@xxxxxxxxxxxxx
- Date: Wed, 10 May 2006 08:07:36 -0700
Ryan the Telegrapher's equations still hold. Provided the material
does not saturate, ignoring fringing for a rectangular section: L=
u0*uR*H/X UMR has a web calculator that if I recall correctly allows
you to input uR.
So, for a uR of 600 and no saturation, the inductance would go up by
600X and the impedance by about 24-25X. You can see that it doesn't
take much nickel to really throw things off.
Steve.
At 07:53 AM 5/10/2006, ryansatrom wrote:
>Aubrey-
>
>I am well aware of the definition of permeability. However, i'm
>struggling with this relationship. For example:
>
>Capacitance increases proportionally to dielectric contstant
>(permittivity).
>
>So if permeability does the same to inductance as permittivity does to
>capacitance, then then inductance of a signal-return path made purely
>of nickel (no plating, used strictly for example) has 600 times the
>inductance of the same signal-return path made from gold?
>
>Are you saying that is true?
>
>
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> http://www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|