FreeLists / si-list / [SI-LIST] JEDEC 1.8V HSTL Interface

[<murali.repal@xxxxxxxxx>]

Hi All,

We have a 1.8V HSTL interface on which we would like to perform SI.
And we only have the JEDEC standard for 1.5V HSTL.

Is it ok to use the 1.5V HSTL and replace VDD by 1.8V ?
Or is there a separate standard for 1.8V HSTL ?
If there is a separate standard, would you please forward it to me ?

Thanks
Murali




Confidentiality Notice

The information contained in this electronic message and any attachments to 
this message are intended
for the exclusive use of the addressee(s) and may contain confidential or 
privileged information. If
you are not the intended recipient, please notify the sender at Wipro or 
Mailadmin@xxxxxxxxx immediately
and destroy all copies of this message and any attachments.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu