[SI-LIST] Experimental/Prototype Supplies

["Jim Antonellis" <janton@xxxxxxxxxxxxx>]

Good morning, afternoon, evening,

Within the caveat of "what you build is what you get",
I would like to get any recommendations (manufacturer 
part numbers) for the following:

1. PCBs with a ground plane and a pattern on the top
   condusive to mounting a variety of components. I
   will be attaching SMA connectors and 50-ohm coax
   as interconnect so the ground plane is critical,
   knowing the dielectric properties is less so. I do
   attach small ICs but I again typically use small 
   coax as interconnect.

2. Copper foil tape.

3. Anything else you feel is a must have.

So what are all you RF/high-freq digital folks using in
your labs???  

My applications are typically 3/6/10Gbps, NRZ, SERDES.

Thx,
Jim
 


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts:

[SI-LIST] Experimental/Prototype Supplies