FreeLists / si-list / [SI-LIST] Re: Curved vs. 90 degree PCB trace paper

[Harry Selfridge <harrys@xxxxxxxxxxxxxxxxxxxxx>]

There are two that I know of:

http://www.montrosecompliance.com/Technical_papers/corners-Japan.pdf

and Doug Brooks' paper

http://www.ultracad.com/articles/90deg.pdf



At 07:28 AM 5/5/05, you wrote:
>Does anybody have the link to (or have a copy of) the research that
>somebody posted in the last year debunking the myth that 90 degree bends
>are bad- even into higher frequencies?  I went through the archives but
>was unable to find it.
>
>Thanks,
>Chris
>
>
>------------------------------------------
>Chris McGrath
>Sr. Hardware Engineer
>ADIC
>ph: (607) 241-4858
>eM: chris.mcgrath@xxxxxxxx
snip  

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu