FreeLists / si-list / [SI-LIST] Curved vs. 90 degree PCB trace paper

["Chris McGrath" <chris.mcgrath@xxxxxxxx>]

Does anybody have the link to (or have a copy of) the research that
somebody posted in the last year debunking the myth that 90 degree bends
are bad- even into higher frequencies?  I went through the archives but
was unable to find it.

Thanks,
Chris


------------------------------------------
Chris McGrath
Sr. Hardware Engineer
ADIC
ph: (607) 241-4858
eM: chris.mcgrath@xxxxxxxx
------------------------------------------
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu