
|
[si-list]
||
[Date Prev]
[05-2003 Date Index]
[Date Next]
||
[Thread Prev]
[05-2003 Thread Index]
[Thread Next]
[SI-LIST] Re: Hspice related question
- From: "Drew Plant" <rplantsprint@xxxxxxxxxxxxx>
- To: <shalini_ggautam@xxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Mon, 12 May 2003 10:36:07 -0700
Hello Shalini,
You're describing placing a V-source in parallel with an I-source. I don't
know if
this is what you want, because the V-source (unless you specify a non-zero
output impedance) will effectively suck up all of the current from the
I-source,
and the net current going out of or into nodes 1 and 2 will be determined by
the rest
of the circuit hooked up to these nodes, not the V-controlled I-source.
Regards,
Drew
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of shalini gautam
Sent: Sunday, May 11, 2003 2:09 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Hspice related question
I have to model a voltage
controlled current source, problem is that the
controlling node is the same as
the node across which this VCCS is
connected something like this. [
it's a kind of non-linear resistor too.]
GXXX 1 2 1 2
value{sin(v(1)-v(2)}
but somehow this sentence gives
syntax error.
I am simulating in spectreS
(similar as hspice) environment.
Any clue why this shows syntax
error.
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.478 / Virus Database: 275 - Release Date: 5/6/2003
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.478 / Virus Database: 275 - Release Date: 5/6/2003
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|