FreeLists / si-list / [SI-LIST] Hspice/spectreS related question

[shalini gautam <shalini_ggautam@xxxxxxxxx>]

                      I have to model a voltage
controlled current source, problem is that the
 controlling node is the same as the node across which
this VCCS is
 connected something like this. [ it's a kind of
non-linear resistor too.]

GXXX 1 2 1 2 value{f(v(1), v(2))}
where f is some general function of v(1) and v(2).

There are other elements too connected to nodes 1 and
2 so these nodes are sort of pre-defined before I am
writing this VCCS statement

   but somehow this sentence gives syntax error
 I am simulating in spectreS (similar as hspice)
environment.

   Any clue why this shows syntax error. 

Thanks

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu