FreeLists / si-list / [SI-LIST] Re: Diff 2 Load

["Ivanov, Evghenii" <E.Ivanov@xxxxxxxxxxxxx>]

Hi,

Look at this part: DS90CP22 - 2X2 800 Mbps LVDS Crosspoint Switch from
National Semiconductor. It is configurable as 2:1 mux, 1:2 demux, repeater
or 1:2 signal splitter


Regards
Eugene Ivanov

Accelight Networks

-----Original Message-----
From: pikeda@xxxxxxxxxxx [mailto:pikeda@xxxxxxxxxxx]
Sent: May 1, 2002 3:03 PM
To: SI-List Discussion Group
Subject: [SI-LIST] Diff 2 Load





Hello Guru's,

Will a termination at the end of a daisy chain work for a dual load
differential
clock @156.25MHz seperated by about .6" minimum, or must a differential
clock
driver be used? If so what would be a maximum stub for the first load?

Thanks for any suggestions.

Paul Ikeda


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu