FreeLists / si-list / [SI-LIST] Re: Cross-hatched reference planes

[si-list] || [Date Prev] [04-2007 Date Index] [Date Next] || [Thread Prev] [04-2007 Thread Index] [Thread Next]

[SI-LIST] Re: Cross-hatched reference planes

From: Jeff Seeger <jseeger@xxxxxxxxxxxxxx>
To: si-list@xxxxxxxxxxxxx
Date: Tue, 03 Apr 2007 12:45:33 -0400

Lee Ritchey wrote:
 >
 >  Unless this is a flex circuit, why would you cross hatch a plane?

        Copper balance, venting, and laminate/laminate bonding
        can be issues in certain situations.

-- 
 
      Jeff Seeger                         Applied CAD Knowledge Inc
      Chief Technical Officer                  Tyngsboro, MA  01879
      jseeger "at" appliedcad "dot" com                978 649 9800


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu