Go to the FreeLists Home Page Home Signup Help Login 		 



Thread Index for si-list, 04-2004

[si-list] || [04-2004 Date Index] [04-2004 Thread Index]

  1. [SI-LIST] Co-Relation between Mentor Graphics ICX SI measurements & Actual SI Measurements, Shiraz Bashir
  2. [SI-LIST] Re: What is the limit?, Giancarlo Guida
  3. [SI-LIST] extracting transmission line parameters, =?big5?b?U3RhbmxleS5DaGl1KKr0q6uyTSk=?=
  4. [SI-LIST] Re: Co-Relation between Mentor Graphics ICX SI measurements & Actual SI Measurements, Hargin, Bill
  5. [SI-LIST] Re: DC-26 GHz Picoprobe, John Wilson
  6. [SI-LIST] Paralleling driver outputs - is this still done?, Grasso, Charles
  7. [SI-LIST] Re: Paralleling driver outputs - is this still done?, Brown, Mike (Austin, TX)
  8. [SI-LIST] Return current crosstalk?, Patrick Jabbaz
  9. [SI-LIST] Re: Return current crosstalk?, Patrick Jabbaz
  10. [SI-LIST] remove non-functional pads, lin-wl_wang
  11. [SI-LIST] Re: remove non-functional pads, lin-wl_wang
  12. [SI-LIST] diff signaling, Landrum, Chris
  13. [SI-LIST] Re: diff signaling, Zabinski, Patrick J.
  14. [SI-LIST] ICU2004 4th Call for Papers, Andy_Kulik
  15. [SI-LIST] Re: 0306 Capacitors, Ken Hayden
  16. [SI-LIST] polarity of chip inductors, Tsai Robert-rvfm80
  17. [SI-LIST] Wanted: EMI,EMC articles, RAJAPALANI
  18. [SI-LIST] Re: Wanted: EMI,EMC articles, Bashir, Shiraz (MED)
  19. [SI-LIST] Core thickness in between power planes!, Tariq Abou-Jeyab
  20. [SI-LIST] HW Test Engineer (SI), Kevin Pierpoint
  21. [SI-LIST] Re: just curious, Hargin, Bill
  22. [SI-LIST] Re: remove non-functional pads: any improvement be seen, lin-wl_wang
  23. [SI-LIST] Re: Common-mode noise on LVD Drivers, Ravinder . Ajmani
  24. [SI-LIST] injecting controlled noise for troubleshooting, Doug Smith
  25. [SI-LIST] Re: polarity of chip inductors, HaroldLSJ
  26. [SI-LIST] Is it reasonable that an ICM model specifies a [ICM S-parameter] section using "mult=value" ?, slwu
  27. [SI-LIST] Re: remove non-functional pads: any improvementbeseen, Abe Riazi
  28. [SI-LIST] test mail, K. Sankar
  29. [SI-LIST] Vias on decoupling pads, Chris Chalmers
  30. [SI-LIST] AW: Vias on decoupling pads, Sol Tatlow
  31. [SI-LIST] IR Cameras (Thermal Imaging), Chris McGrath
  32. [SI-LIST] Dembedding an open transmission line, package_char
  33. [SI-LIST] Re: Vias on decoupling pads (aka plugging), Sol Tatlow
  34. [SI-LIST] Re: Vias on decoupling pads, Patrick Jabbaz
  35. [SI-LIST] Re: Dembedding an open transmission line, Knighten, Jim L
  36. [SI-LIST] Re: Is it reasonable that an ICM model specifies a [ICMS-parameter] section using "mult=value" ?, Muranyi, Arpad
  37. [SI-LIST] Re: remove non-functional pads: measuring via capacitance with TDR, lin-wl_wang
  38. [SI-LIST] QUERRY, sunil Morajkar
  39. [SI-LIST] SERDES recommendation request, npaul
  40. [SI-LIST] Re: remove non-functional pads: measuring via capacitance with TDR, Loyer, Jeff
  41. [SI-LIST] Re: +AFs-SI-LIST+AF0- Re: Is it reasonable that an ICM model specifies a +AFs-ICMS-parameter+AF0- section using +ACI-mult+AD0-value+ACI- ?, +ACI-Muranyi, Arpad+ACI-
  42. [SI-LIST] Re: SERDES recommendation request, Brad Griffin
  43. [SI-LIST] Resistance extraction, Jayaprakash
  44. [SI-LIST] help needed regarding IBIS modeling for an IC, kishore bachu
  45. [SI-LIST] 答复: How to assign IBIS buffer modelto its corresponding Xilinx Virtex-II Pro PIN ?, yu . yanfeng
  46. [SI-LIST] interconnect modeling-equivalent circuit from Fasthenry enough?, vinay b
  47. [SI-LIST] Wacky power plane impedance measurements, Landrum, Chris
  48. [SI-LIST] SI opportunity with TriCN - Harrisburg, Pa, John Ellis
  49. [SI-LIST] Re: Wacky power plane impedance measurements, Brown, Mike (Austin, TX)
  50. [SI-LIST] SSN issue?, Eric Hsu
  51. [SI-LIST] si-list administrivia, Ray Anderson
  52. [SI-LIST] about PCI clock length, myan
  53. [SI-LIST] 答复: about PCI clock length, myan
  54. [SI-LIST] unsubscribe, Quiet, Duane
  55. [SI-LIST] Re: Transformer Hum, Steve GullWing UK
  56. [SI-LIST] Yet another IBIS issues, Gil Gafni
  57. [SI-LIST] Re: Yet another IBIS issues, Hassan O. Ali
  58. [SI-LIST] 3.125 Ghz via structures, Inchauspe, Greg E
  59. [SI-LIST] Digest mode broken?, Bob Perlman
  60. [SI-LIST] 60 MHz sinusoidal clock Decoupling, Chris Chalmers
  61. [SI-LIST] Re: 60 MHz sinusoidal clock Decoupling, Steve Rogers
  62. [SI-LIST] Signal Integrity contractor needed at Intel in the Pacific NW, Lusk, John B
  63. [SI-LIST] Decoupling Capacitors, Gareth Baron
  64. [SI-LIST] Current Carrying Capacity for Power Supply Vias, Baze, Rick
  65. [SI-LIST] Off diagonal Gij in RLGC matrix, Chris Cheng
  66. [SI-LIST] Any suggestions/recomendations on design?, Tayyab Jamil
  67. [SI-LIST] Which tool is the best, Tayyab Jamil
  68. [SI-LIST] Any suggestions/recomendations on design?, Tayyab Jamil
  69. [SI-LIST] how to connect logic analyzer probes to PCI bus (66MHz), Kobi Kivity
  70. [SI-LIST] Re: Which tool is the best, Santhosh E P
  71. [SI-LIST] silycon oxide taper, andreevb
  72. [SI-LIST] zincor EMI contact, Jan Vercammen
  73. [SI-LIST] FW: how to connect logic analyzer probes to PCI bus (66MHz), Webb, Jeremy
  74. [SI-LIST] Re: FW: how to connect logic analyzer probes to PCI bus (66 MHz), Zelno, John
  75. [SI-LIST] Thermal planes as reference planes?, Peterson, James F (FL51)
  76. [SI-LIST] placement of decoupling caps (again), Eric Steimle
  77. [SI-LIST] PCB stackup material properties for a fee?, Dunbar, Tony
  78. [SI-LIST] Re: placement of decoupling caps (again), Lee Ritchey
  79. [SI-LIST] Re: PCB stackup material properties for a fee?, richard moffat
  80. [SI-LIST] subscribe, "Fu, Greg (傅?操 IES)"
  81. [SI-LIST] thermal resistance of copper plane., Jomesh P A
  82. [SI-LIST] where to find input port name in touchstone file ?, slwu
  83. [SI-LIST] Re: 80MHz Crystal Oscillator, Clewell, Craig
  84. [SI-LIST] OT: High Speed Digital Design Courses, Ruth Sims
  85. [SI-LIST] Inductance and Insertion Loss, Moeller, Merrick
  86. [SI-LIST] Current carrying capacity of power planes, Hanley, David C
  87. [SI-LIST] Re: where to find input port name in touchstone file ?, dgun
  88. [SI-LIST] Re: [SI-LIST]: Which tool is the best, Fabrizio Zanella
  89. [SI-LIST] IPC Design Certification, Mike Farrell
  90. [SI-LIST] Re: Inductance and Insertion Loss, andrew . c . byers
  91. [SI-LIST] rational function approximation, Amitava Bhaduri
  92. [SI-LIST] Re: Placement of decoupling caps (UMR paper quote.), Gareth Baron
  93. [SI-LIST] SI tools: pros and cons, Sol Tatlow
  94. [SI-LIST] Re: Current carrying capacity of power planes, Sol Tatlow
  95. [SI-LIST] Re: IPC Design Certification, Bob McCreight
  96. [SI-LIST] Re: SI tools: pros and cons, Mellitz, Richard
  97. [SI-LIST] Re: where to find input port name in touchstone file for ICM1.0 ?, Mirmak, Michael
  98. [SI-LIST] Constrianing PCBs, Gareth Baron
  99. [SI-LIST] Re: rational function approximation, MikonCons
  100. [SI-LIST] IBISCHK4 version 4.0.2 available!, Mirmak, Michael
  101. [SI-LIST] Staff Signal Integrity Engineer Position Open in Harrisburg PA, Bergey, Dana
  102. [SI-LIST] Re: a picture = 2K bytes, Paglia, Frank M
  103. [SI-LIST] blind/buried vias, Boston area, Jeff Seeger
  104. [SI-LIST] Re: [SI-LIST]: Which tool is the best -LINPARdiscussion, Abe Riazi
  105. [SI-LIST] Re: [SI-LIST]: Which tool is the best - LINPARdiscussion, Paul Levin
  106. [SI-LIST] frequency-dependent lumped parameters, Xilei Liu
  107. [SI-LIST] Re: frequency-dependent lumped parameters, zhangkun 29902
  108. [SI-LIST] Ansoft Maxwell Macro Question, Matthew Schiefer
  109. [SI-LIST] Sam Turner/AALC/AlcatelAustralia is out of the office., Sam . Turner
  110. [SI-LIST] Using Spice models in Spectraquest, Sreejith Varma
  111. [SI-LIST] Re: Using Spice models in Spectraquest, Bhagwath, Nitin
  112. [SI-LIST] Re: [SI-LIST]: Which tool is the best - LINPARdiscussion, MikonCons
  113. [SI-LIST] Re: [SI-LIST]: Which tool is the best - LINPARdisc ussion, Chris Cheng
  114. [SI-LIST] Is it a bird, a plane, or no more ASCII drawings., steve weir
  115. [SI-LIST] time delay in designer, Sivaprasad Padmanabhan
  116. [SI-LIST] Re: Is it a bird, a plane, or no more ASCII drawings., Christman, Timothy (STP)
  117. [SI-LIST] Re: Which tool is the best - ICX, David Kaiser
  118. [SI-LIST] administrative attachment test, Raymond Anderson
  119. [SI-LIST] administrative attachment test #3, Ray Anderson
  120. [SI-LIST] administrative attachment test #2, Ray Anderson
  121. [SI-LIST] Linpar comment, MikonCons
  122. [SI-LIST] One last admin test........, Raymond Anderson
  123. [SI-LIST] how to include images in si-list messages that the listserver willaccept., Raymond Anderson
  124. [SI-LIST] inline gif image test, Dimiter Popoff
  125. [SI-LIST] base64 encoded jpg image inline, Raymond Anderson
  126. [SI-LIST] uuencoded jpg image inline, Raymond Anderson
  127. [SI-LIST] First Call for Participation and Presentations, IBIS Summit at DAC, Lynne Green
  128. [SI-LIST] How good is enough(Power Integrity), zhangkun 29902
  129. [SI-LIST] Arc-length continuation, Ashok Prabhu
  130. [SI-LIST] Re: How good is enough(Power Integrity), zhangkun 29902
  131. [SI-LIST] Re: Linpar comment, Geoff Stokes
  132. [SI-LIST] On-chip SI, ajoy mandal
  133. [SI-LIST] Power - Ground Swap in PCB, Mehrdad Salami
  134. [SI-LIST] T-line resonant frequency, raj singh
  135. [SI-LIST] Board Manufacturers for fine pitch components, Tayyab Jamil
  136. [SI-LIST] Re: Board Manufacturers for fine pitch components, olegkou
  137. [SI-LIST] Job Openings in IBM Research - Communication Technologies, Christian Schuster
  138. [SI-LIST] Re: Power - Ground Swap in PCB, Lee Ritchey
  139. [SI-LIST] 1 oz vs. 1/2 oz cu, Inchauspe, Greg E
  140. [SI-LIST] Re: T-line resonant frequency, Landrum, Chris
  141. [SI-LIST] thermal relief, jan gillis
  142. [SI-LIST] 800MHz Radiated Emissions, Bashir, Shiraz (MED)
  143. [SI-LIST] Dielectric strength, Ed Sayre III
  144. [SI-LIST] Re: thermal relief, Nagel, Michael
  145. [SI-LIST] 0402 capacitors and 1mm pitch BGAs, Bob McNamara
  146. [SI-LIST] IEEE CPMT Society Phoenix chapter - May 2004 meeting announcement, Sam Karikalan
  147. [SI-LIST] how to calculate maximum current that can be provided by one via, Pang Ning(Peter)
  148. [SI-LIST] Re: how to calculate maximum current that can be provided by one via, Chang Hongli (Henry)
  149. [SI-LIST] ??: how to calculate maximum current that can be provided by one via, Pang Ning(Peter)
  150. [SI-LIST] Re: upper to How high the frequency to scan is sufficient for target impedance of Power distribution system, Paglia, Frank M
  151. [SI-LIST] Choice of routing layers, Mahesh Krishnan
  152. [SI-LIST] MEMS Simulink models, Claudio Siviero
  153. [SI-LIST] Re: MEMS Simulink models, Geoff Stokes
  154. [SI-LIST] Re: Which tool is the best - SiAuditor, Coe, Stephen
  155. [SI-LIST] Ansoft Q3D Extractor, Pavan Kaivaram
  156. [SI-LIST] Spread Spectrum Clock Synthesizers, Bashir, Shiraz (MED)




[ Home | Signup | Help | Login | Archives | Lists ]

All trademarks and copyrights within the FreeLists archives are owned by their respective owners.
Everything else ©2007 Avenir Technologies, LLC.