FreeLists / si-list / [SI-LIST] Re: ConceptHDL -> BLAST (EDIF)

["Jinto N.Jose" <jinto.jose@xxxxxxxxx>]

Hi,
        You can use the packager output file pstxref.dat as input to
Blast. You can use the vpnx command to convert the pstxref.dat file to a
.qnf  file and then use qnf2pin command for converting the qnf file to
the pin file. This flow will automatically come if you select the option
"PCB flow using concept" in the Blast setup advisor. 

Regards
Jinto

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Martin Gallo
Sent: Wednesday, April 03, 2002 6:02 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] ConceptHDL -> BLAST (EDIF)



Hi All,

I want to transfer Cadence Concept-HDL netlist to INNOVEDA BLAST but I
have some problems:

I use edif300 utility by Cadence to export my ConceprHDL netlist in EDIF
format; then I use EEDIF (INNOVEDA) utility to convert EDIF file into
QNF (or *.pin) file. When I launch EEDIF, I have the following log:

************************************************************************
****
*************
************************************************************************
****
*************
* * * * - - - - - - - - - - - - - - - - * * * *

* EENET - Multiple Format Netlist Manipulation and Translation -
04/03/98 *

* (executed on

NOTE! Date/Time Records out of range, reassigned by chkdat.

(m/d/y h:m:s was 4/3/102 14:19:58, now 4/3/0 14:19:58)

03-Apr-1900 at 14:19:58) *

* * * * - - - - - - - - - - - - - - - - * * * *

* Copyright (c) 1987-1993 by Eckert Enterprises *

* * * * - - - - - - - - - - - - - - - - * * * *

Reading control file #1, <edf2qnf.ctl>

WARNING! Ignoring unexpected edif construct '(edifheader', on line 3

WARNING! Ignoring unexpected library (before cells) construct
'(libraryheader', on line 20

WARNING! Ignoring unexpected cell construct '(cellheader', on line 28

WARNING! Ignoring unexpected cell construct '(cluster', on line 31

ERROR! Missing celltype or name for cell netlist_lib

Parsing line 68, near '<*>': eInformation (primaryName "PART_NAME"))))))
<*> (cell

Bad library in edif

Bad edif construct in file flat.edf

ERROR! Trouble parsing EDIF input file! (line 69)

ERROR! Unsuccessful call to EENET! Aborting...

************************************************************************
****
*************
************************************************************************
****
*************

If somebody can help me, I can send original (very simple, only 2 parts
for
test) edif file.
Is there other method to transfer netlist between ConceptHDL and BLAST ?

Thanks

Martin
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  



-- Attached file included as plaintext by Ecartis --
-- File: Wipro_Disclaimer.txt

**************************Disclaimer************************************
      


Information contained in this E-MAIL being proprietary to Wipro Limited
is 'privileged' and 'confidential' and intended for use only by the
individual or entity to which it is addressed. You are notified that any
use, copying or dissemination of the information contained in the E-MAIL
in any manner whatsoever is strictly prohibited.



 ********************************************************************


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu