|
[si-list]
||
[Date Prev]
[04-2002 Date Index]
[Date Next]
||
[Thread Prev]
[04-2002 Thread Index]
[Thread Next]
[SI-LIST] HSPICE TR0 error
- From: Peter LaFlamme <plaflamm@xxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 08 Apr 2002 16:29:20 -0400
Dear SI'ers,
Rather than go through the painful process of calling Avant! I thought some of
you may have run across this error. When running HSPICE the simulation runs
completely, however the TR0 file is hosed up. In my output file I get the
following statement::
** On entry to DGELS parameter number 10 had an illegal value
Have any of you seen this before?? If so were you able to get around it?
Thanks,
Peter
--
Peter LaFlamme
Applied Micro Circuits Corp.
Staff System Applications Engineer
200 Minuteman Rd, 3rd Floor
Andover, MA 01810
978-247-8470 phone
978-623-0055 Fax
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
