
|
[si-list]
||
[Date Prev]
[03-2008 Date Index]
[Date Next]
||
[Thread Prev]
[03-2008 Thread Index]
[Thread Next]
[SI-LIST] Re: Differential Signals with changed ground references
- From: "韩国兵" <han.guobing@xxxxxxxxx>
- To: ryansatrom <ryan.satrom@xxxxxxxxxxx>
- Date: Thu, 13 Mar 2008 11:14:53 +0800
Hi ryansatrom,
I think it depends. It may cause mismatch issues since the characteristic
impedance will change when the ground reference is changed.
Regards,
Robin
2008/2/27, ryansatrom <ryan.satrom@xxxxxxxxxxx>:
>
> I am currently trying to determine the performance of an interface
> where the PCB ground planes and the device grounds are not tied
> together (except on the very outside of the PCB).
>
> I recognize this is a design flaw (I didn't design the PCB), and I also
> recognize that this causes floating signals for all single-ended
> signals.
>
> However, my intuition tells me that the differential signals would
> perform okay (ignoring any failures due to PDS - strictly from a signal
> integrity perspective).
>
> Am I correct in this assumption? Or would it be based on the device
> design and how the device reads the differential inputs/outputs?
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|