FreeLists / si-list / [SI-LIST] How to get RLC matrix from spice model

["Arai, Tadashi" <tadashi.arai@xxxxxxx>]

Gurus,
 
Can someone tell me how to extract RLC matrix from connector spice
model?
 
I am trying to extract RLC matrix of a connector from a vendor spice
model crated by Q3D. It was easy for me to get R matrix (only diagonal
part) and C matrix, however, L matrix seemed a little complex.
The spice model has L-elements which were diagonal part. And it seems to
be able to calculate the off-diagonal part of L matrix from K-elements;
Lij = Kij * SQRT(Lii * Ljj). But how to handle the F-elements? That is
my question.
 
Regards,
---- 
Tadashi ARAI / MTS Application Engineer 
Hardware Support Engineering, Customer Support Services 
Japan Engineering Lab., AMD Japan Limited 
+81-3-3346-7687 / +81-3-3342-5196 (fax) 

 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu