|
[si-list]
||
[Date Prev]
[03-2006 Date Index]
[Date Next]
||
[Thread Prev]
[03-2006 Thread Index]
[Thread Next]
[SI-LIST] Re: HSPICE S-parameter File Syntax
- From: "Gary Otonari" <garyo@xxxxxxxxxxxx>
- To: <chen_jinhua@xxxxxxx>, <esayre3@xxxxxxxx>
- Date: Wed, 1 Mar 2006 18:10:32 -0800
Thanks, everyone, for the prompt and very helpful feedback. Still have =
not
resolved the issue, and now suspect a license or version problem. Good =
to
know that so many have been successfully using this feature...
-- Gary
-------------------------------------------------------------------------=
---
--------
Attend the GTL Signal Integrity University in Sunnyvale, CA - October =
31 -
November 3=20
=20
GTL 122 - Fundamental Principles of Signal Integrity
GTL 250 - High Speed Board Design
=20
GigaTest Labs =20
134 South Wolfe Road * Sunnyvale, CA * 94086
408.524.2700
www.gigatest.com
=20
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] =
On
Behalf Of chen_jinhua@xxxxxxx
Sent: Wednesday, March 01, 2006 1:44 PM
To: esayre3@xxxxxxxx; garyo@xxxxxxxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: HSPICE S-parameter File Syntax
Try not use the number as the first letter for filename, modelname, =
nodename
...
Jinhua
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] =
On
Behalf Of Ed Sayre III
Sent: Wednesday, March 01, 2006 4:46 PM
To: garyo@xxxxxxxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: HSPICE S-parameter File Syntax
Gary,
This is pulled from a working s-parameter demo file I just used. The =
s-paramter file name and model name have been changed to protect the
innocent..
.model NAME s tstonefile=3D'FILENAME.s4p'
s1 txp rxp txn rxn 0 mname=3DNAME INTERPOLATION=3DSTEP
This was for a 4 port single ended representation a 2 port differential=20
model. Ports txp and txn are inputs and rxp and rxn outputs.
Regards
-Ed
At 12:39 PM 3/1/2006 -0800, Gary Otonari wrote:
>Sorry if this has been covered:
>
>I have a need to deliver HSPICE netlists that use S-parameter models =
=3D
>(for
>vias). Don't have HSPICE documentation to check the correct syntax, =
and =3D
>our
>netlist won't pass thru the HSPICE parser. Error is on the =3D
>"DATAFILE=3D3Dxxx" =3D20
>
>Here's the relevant text:
>
>" svia n1 n2 n3 n4 0 fqmodel=3D3Ddiffvia "=3D20
>" .model diffvia sp n=3D3D4 datafile=3D3Dvia.s4p "
>
>Comments from you HSPICE experts out there, greatly appreciated...
>
>-- Gary
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> http://www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
>!DSPAM:440606e9183108841984579!
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
