Go to the FreeLists Home Page Home Signup Help Login
 



[si-list] || [Date Prev] [03-2006 Date Index] [Date Next] || [Thread Prev] [03-2006 Thread Index] [Thread Next]

[SI-LIST] Re: HSPICE S-parameter File Syntax

  • From: "Perry Qu" <perry.qu@xxxxxxxxxxx>
  • To: <garyo@xxxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
  • Date: Wed, 1 Mar 2006 16:05:08 -0500
Gary:

What I usually do is something like this:

.subckt svia inp inn outp outn ref
Spkg inp inn outp outn ref mname=smodel
.model smodel s tstonefile='../diffvia.s4p' fbase=xxx fmax=xxx
.ends svia

Hope this helps. You need to make sure your port setup in s4p match the
subcircuit.

Regards

Perry

======================================= 

Perry Qu 

Design & Qualification, Alcatel Canada 

600 March Road, Ottawa ON, K2K 2E6 

DID: 613-7846720  Fax: 613-5993642 

Email: perry.qu@xxxxxxxxxxx 

======================================= 


-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Gary Otonari
Sent: Wednesday, March 01, 2006 3:40 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] HSPICE S-parameter File Syntax

Sorry if this has been covered:

I have a need to deliver HSPICE netlists that use S-parameter models = (for
vias).  Don't have HSPICE documentation to check the correct syntax, and =
our netlist won't pass thru the HSPICE parser.  Error is on the =
"DATAFILE=3Dxxx" =20

Here's the relevant text:

" svia n1 n2 n3 n4 0 fqmodel=3Ddiffvia "=20
" .model diffvia      sp      n=3D4     datafile=3Dvia.s4p "

Comments from you HSPICE experts out there, greatly appreciated...

-- Gary


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  





[ Home | Signup | Help | Login | Archives | Lists ]

All trademarks and copyrights within the FreeLists archives are owned by their respective owners.
Everything else ©2007 Avenir Technologies, LLC.