FreeLists / si-list / [SI-LIST] EISA EDGE CONNECTOR

[<mahesh.linge@xxxxxxxxx>]

Hi List members,

I am designing a board which is a ADD-ON card in EISA slot.
Can anybody of you help me out for the mechanical details for the
fingers on the ADD-ON card.
I want the details for the pad size, pitch (distance between two
consecutive pads), pad thickness for the ADD-ON card.

I will appreciate your quick reply.
Thanks in advance.

Mahesh Linge,
Project Engineer,
Wipro Technologies.



Confidentiality Notice=0D

The information contained in this electronic message and any attachments to=
 this message are intended
for the exclusive use of the addressee(s) and may contain confidential or=
 privileged information. If
you are not the intended recipient, please notify the sender at Wipro or=
 Mailadmin@xxxxxxxxx immediately
and destroy all copies of this message and any attachments.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu