
|
[si-list]
||
[Date Prev]
[03-2005 Date Index]
[Date Next]
||
[Thread Prev]
[03-2005 Thread Index]
[Thread Next]
[SI-LIST] Re: A IBIS question about usage method
- From: "Heinrich.Smith" <heinrich.smith2005@xxxxxxxxx>
- To: arpad.muranyi@xxxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Thu, 3 Mar 2005 10:56:30 +0800
Dear Arpad,
I think I know what you mean, so your suggestion is that we should use
the specific IBIS model case by case, not just tunning higher the
working frequency on lower chip for simulation.
Thank you.
Best regards,
Joseph
On Wed, 2 Mar 2005 08:42:32 -0800, Muranyi, Arpad
<arpad.muranyi@xxxxxxxxx> wrote:
> Joseph,
>
> It has been a while when I was working with the DDR2 models,
> but as far as I remember, the spec at the higher speed is a
> little more restrictive than at lower speed. So the faster
> chips should work at lower speeds, but not the other way
> around.
>
> Did this answer your question?
>
> Arpad
> ------------------------------------------------------------
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] =
> On Behalf Of Heinrich.Smith
> Sent: Wednesday, March 02, 2005 2:30 AM
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: A IBIS question about usage method
>
> Dear Arpad Muranyi,
>
> Thanks for your reply so fast.
> Base on the example of DDR2 533/400Mhz that I mentioned the previous
> mail, do I need to consider the possibility that DDR2 533MHz can cover
> DDR2 400MHz on performing simulation? Even I know almost high
> frequency chips can cover low frequency ones on real DIMM performance.
>
> Thank you.
> Best Regards,
> Joseph Kao
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at: =20
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
> =20
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|