FreeLists / si-list / [SI-LIST] A question about IBIS usage method

["Heinrich.Smith" <heinrich.smith2005@xxxxxxxxx>]

Dear all,

When I can't get the update version IBIS model that I need, I would
perform the simulation=E2=80=A6=E2=80=A6=E2=80=A6=E2=80=A6=E2=80=A6
Is it reasonable to use the lower speed IBIS model (for ex.DDR2-400MHz
component) instead of the updated higher speed IBIS model(for ex.
DDR2-533MHz component) for higher speed DDR 533MHz bus simulation if I
only simply changed the working frequency of IBIS model with
simulation tool?
Can the IBIS model support this action ? or any others I want to consider ?

Thank you for your reply.
Best Regards,
Joseph Kao
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu