FreeLists / si-list / [SI-LIST] Plated through hole capacitance

["Fitzgerald, Kevin" <kevin.fitzgerald@xxxxxxxxxxxx>]

Hi,

I am trying to find the best way to estimate the capacitance of a plated
thru hole which is being used for press fit connectors.

The hole has a diamter of 0.040 inch and the pad is 0.065 inch and the
keepout has a diameter of 0.085inch.  The board will be about 0.200 nich
thick

thanks

Kevin Fitzgerald

Jr Hardware Engineer 
General Dynamics Canada
(613) 596-7776
kevin.fitzgerald@xxxxxxxxxxxx



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu