FreeLists / si-list / [SI-LIST] Antw: Re: EPD Guidelines

["Robert Nowak" <RNowak@xxxxxxxxxxxxx>]

Hi Sreekanth,

Try  http://www.sanmina-sci.com/Solutions/pdfs/pcbres/PCB%20DFM%20Guide.pdf=



Regards

Robert







Robert Nowak
Hardware R&D
AUSTRIAN GAMING INDUSTRIES GMBH
Wiener Strasse 158
2352 Gumpoldskirchen
AUSTRIA/EUROPE
Tel:   +43 2252 606 277
Fax:  +43 2252 63 587
Email: rnowak@xxxxxxxxxxxxx=20

Austrian Gaming Industries GmbH
Gumpoldskirchen
FN 109445 z
Landesgericht Wiener Neustadt

------------------------------------
CONFIDENTIALITY NOTICE
------------------------------------
This email is intended only to be read or used by the addressee. The =
information contained
in this email message may be confidential information. If you are not the =
intended recipient,
any use, interference with, distribution, disclosure or copying of this =
material is unauthorised
and prohibited. Confidentiality attached to this communication is not =
waived or lost by reason
of the mistaken delivery to you.

If you have received this message in error, please delete it and notify us =
by return email or
telephone Austrian Gaming Industries GmbH +43 2252 6060. Any email =
attachment may
contain software viruses which could damage your own computer system. =
Whilst reasonable
precaution has been taken to minimise this risk, we cannot accept =
liability for any damage=20
which you sustain as a result of software viruses. You should therefore =
carry out your own
virus checks before opening any attachments.



>>> "sreekanthn" <sreekanthn@xxxxxxxxxxxxxxx> 02/06/08 9:11  >>>

Dear Experts,

             I would like to know the dos and don'ts while designing a =
board
which is going for a mass production as a commercialized consumer =
electronic
product. Is there any books/resource as an Electronic Product Design
document ?
             My main area of concern is the Board design including PCB and
mechanical design guidelines for mass production.

Kindly comment.

Best Regards,
Sreekanth N Nampoothiri.


The information contained in this electronic message and any attachments =
to this message are intended for the exclusive use of the addressee(s) and =
may contain proprietary, confidential or privileged information. If you =
are not the intended recipient, you should not disseminate, distribute or =
copy this e-mail. Please notify the sender immediately and destroy all =
copies of this message and any attachments contained in it.

Contact your Administrator for further information.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list=20

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net=20

List archives are viewable at:    =20
                http://www.freelists.org/archives/si-list=20
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages=20
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu=20
 =20




------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu